Exporting Fluent .msh file

Topics related to importing and exporting file formats, etc.

Exporting Fluent .msh file

Postby aelghany » Wed Apr 17, 2013 12:29 pm

I recently created a 3D model in cubit. The mesh is a composed of multi-voulmes created from simple curves swept along other curves..etc and also bricks and cylinders. I meshed the entire volume and created side sets composed of the external surfaces of the domain grouped together using groups.
Now I am trying to save it to .msh file to be read by Fluent later on. I get the following message

>cubit.cmd('Export Fluent "/home/aelg/3dmesh" volume all Overwrite')
ERROR: Cannot export FLUENT with mixed dimensions
ERROR: Could not export the data to a file.

I also get the same if I did not use the "volume all" part.

Posts: 5
Joined: Mon Apr 08, 2013 12:02 am

Re: Exporting Fluent .msh file

Postby csimsoft Moderator » Thu Apr 18, 2013 2:19 pm

After looking at your model, it seems that during your bottom up geometry creation some free surfaces or sheet bodies were not consumed and you have volumes and free surfaces merged together. The Fluent export doesn't support mixed 2D and 3D elements.

You can see the surfaces/sheets by typing 'draw volume with is_sheet'

To solve this,

1. Unmerge the volumes and surfaces with 'unmerge all' or Geometry>Volume>Imprint/Merge in the GUI.
2. Delete all the surfaces 'delete surface all' or Geometry>Surface>Delete in the GUI. This will delete all the free surfaces.
3. Then, try the export again.

Here is the Fluent summary after I exported your file:

Number of dimensions = 3
Number of element blocks = 25
Number of sidesets = 8
Number of nodesets = 0
Number of bc sets = 1
Number of elements = 845196
Number of nodes = 948933
csimsoft Moderator
Posts: 298
Joined: Tue Feb 14, 2012 5:59 pm
Location: American Fork, UT

Return to Importing/Exporting

Who is online

Users browsing this forum: No registered users and 1 guest


Search / Mark

User Control Panel


Who is online

In total there is 1 user online :: 0 registered, 0 hidden and 1 guest (based on users active over the past 5 minutes)
Most users ever online was 83 on Tue Nov 13, 2018 11:44 am

Users browsing this forum: No registered users and 1 guest